Wire and Cable Abrasion Resistance Testing Equipment / Test Apparatus

1. Application

ZY6152A type wire and cable abrasion tester is suitable for testing the wear resistance of wire and cable covering. Its design and manufacture conform to the requirements of JIS C3005 standard. For wire and cable manufacturers, colleges and universities and commodity inspection departments widely used.

2. Main Technical Parameters

(1) Millstone Diameter: Ф 350mm

(2) Rotation speed: 60 R / min

(3) Load: 0.3KG, 0.5kg

(4) Abrasive belt: silicon carbide sand paper of 36.

(5) Work power supply: AC220V, 50HZ

(6) Size: L500 * W500 * H1140 mm

3. The Use Of Equipment

(1) Cut a section of sample with appropriate length from the product, fix one end of the sample on the sample fixture about 300 mm above the center of the wear disc, and ensure that the sample wire is in the online trough to prevent sliding, and hang a weight of specified weight on the other end of the sample, as shown in Fig. 1 above.

(2) Insert the power supply (AC220V) correctly according to the label on the equipment, and open the "power supply" switch on the control panel.

(3) According to the test requirements, the number of turns on the counter is set.

(4) Press the "start" button, the disc will rotate clockwise, and the counter will start counting.

(5) When the rotation times of the millstones reach the number of times, the alarm becomes brighter and gives a voice prompt. Press the stop button, the counter is cleared, the alarm is reset, and the test is finished.

(6) After the test, turn off the power supply in time, take off the sample, and check whether the covering is worn or whether the inside of the insulating skin is exposed.

(7) Organize the test equipment for the next time.

ZONSKY’s three business units: wire & cable and plastic testing equipment division, flame retardant testing instrument division, environmental test equipment division, is a high-tech enterprise of research and development, manufacturing and sales. It has been established for nearly 20 years, gathering the industry's top talents, elite teams, excellent technology, high-quality customer groups and innovative ideas, which enables us to become the leader of the experiment instrument industry.

1. Wire and cable and plastic testing instruments

It is applied to equiped wire & cable, special cable, automobile and rail transit cable, aviation wire and cable, charging hub wire and cable, robot cable, UL, VDE, CSA certified testing instruments and plastics, electrical appliances testing instruments, and fire research cooperation in the distinguished universities.

2. Flame retardant testing equipment

Applied to construction and components,wire and cable,fire fighting and engineering, plastics & chemicals, furniture & wood, textile & fiber, motor vehicles, electronics and electrical appliances, aviation materials, vessel materials, children's toys and flame retardant testing materials based on the standards from western countries.

3. Environmental testing instruments

It is applicable to rigorous testing of environmental requirements in all walks of life, such as electronics connectors, hardware and so on, which are severely tested under high and low temperature. We provide customers with an overall solution of laboratory planning, selection, construction, technical consultation and training.

ZONSKY has precipitated nearly twenty years of professional skills in order to create quality products with expertise. The idea of "sailing dreams with science and technology" has gathered the elite of the industry and created excellent product team.

ZONSKY has been consistently committed to the belief of improving the competitiveness of enterprises and enhancing the corporate image, creating high quality products, keeping innovation and never stop...