IEC 60695 Stainless Steel Glow Wire Test Chamber / Testing
Equipment
1. Application
Insulating materials or other solid combustible materials that are
prone to flame spread inside the equipment may be ignited by a hot
wire or a burning element. Under certain conditions, such as the
fault current flowing through the wire, component overload and bad
contact, some components will reach a certain temperature and cause
the nearby parts to ignite.
This testing machine is used to evaluate the ignition risk of
thermal stress caused by heat source such as burning element or
overload resistance in a short time. Applicable to electrical and
electronic equipment and its components, components, but also for
solid electrical insulation materials or other solid combustible
materials.
2. Reference Standard
GB/T5169.10, IEC60695, UL746A
3. Test Principle
Heating wire test using flameless ignition source (Heating wire is
a standard resistance wire ring) It uses electric heating to a
specified temperature, and then under test conditions, makes the
heating wire touch the tested sample.
(1) Inside capacity: 0.5 m3, width * depth * height: 950 * 600 *
900 (mm)
(2) Outline size: 1200 (long) x 600 (wide) x 1080 (high) mm
(3) Hot wire: made of nickel / chromium with a diameter of 4mm.
(4) Thermocouple: 0.5 mm diameter armored filament thermocouple,
which can withstand high temperatures of 1050℃.
(5) Heating current: when the temperature is 960℃, the current is
between 120 ~ 150 A.
(6) The force applied to the test is 0.8 ~ 1.2 N, and the
penetration depth is at least 7 mm.
(7) Timer: ignition duration (Ti) and flame extinction time (Te).
Timer range: 0 ~ 99.99 s.
(8) Outer box material: stainless steel
FAQ
Q: Are you trading company or manufacturer ?
A: We are a manufacturer.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? Is it free or extra ?
A: No, we don't provide the samples for testing.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50%
T/T in advance ,balance before shipment.
If you have another question, please feel free to contact us.
Q: What is your terms of payment ?
A: The warranty for the equipment is 1 year. Definitely, all
equipment are tested well and runs well by testing our customer's
sample before shipment. Please contact us if the equipment doesn't
work well after being shipped to your company. We will guide you
how to fix it. The spare parts or components will be sent if
necessary. The charges will be occurred if it is caused by
customer's misoperation.
